Blackmagic Design Spares - ATEM 2M/E Panel - PCB Main Professional Cameras as camera shake is much

as camera shake is much more noticeable at 12K resolution

Removing Rear Hardware: You must remove the silver hex nuts and washers from every BNC port associated with this board on the rear panel

you can connect up to 3 x 3G-SDI video devices to SMPTE-2110 in the single converter

Do you have a specific SSD in mind

Blackmagic Pocket Cinema Camera 6K Pro / G2 (with specific firmware)

Blackmagic Design Spares - ATEM 2M/E Panel - PCB Main Professional Cameras as camera shake is muchThe Blackmagic Design Spares ATEM 2 M E Panel PCB Main is the "Master Controller" or "Brain" of the 2 M E Advanced or Broadcast Panel. While the other boards in the panel handle specific button banks or LCDs, the Main PCB manages the high level system operations, network communication, and the synchronization of all secondary boards. If this board fails, the panel effectively becomes a "dumb" chassis of buttons with no way to communicate with the ATEM