Freud Rail & Stile Profile Router Bit - 1-1/2" Diameter, 1/4" Cut, 1/2" Shank Type_Drum Sanders Overall length: 8-1/4"

Overall length: 8-1/4"

Amp Breaker: 40

This spindle drives the cutterhead to mill profiles in wood stock

and airborne contaminants—all while eliminating the breathing resistance and fogging common with traditional respirators

Shops planning to run wood strips regularly should ask about the automatic strip loading device as a factory-order accessory

Freud Rail & Stile Profile Router Bit - 1-1/2" Diameter, 1/4" Cut, 1/2" Shank Type_Drum Sanders Overall length: 8-1/4"These cleverly designed bits produce both the rail and stile ogee shapes for your doors with a single bit. Use either the 99 060 or 99 061 bits to rout cope and stick profile cuts on the rails and stiles. Then use this bit to rout the panel slot and the back of the tongue on the coped piece. The result is a complete rail and stile match for any cabinet door project. Use with hand held or table mounted routers to cut hardwood or softwood door parts.