Beer Faucet Shank | 5.5" | Welded 3/16" Barb | Includes Plastic Collar itemID-11917 Each keg used two poppets

Each keg used two poppets

Not intended for long-term storage

We recommend you transfer half of your wort to your fermenter before applying inline oxygen (O2) to your wort transfer

Please note the location of the PRV may vary

you’ll never have to worry about a misplaced lighter again

Beer Faucet Shank | 5.5" | Welded 3/16" Barb | Includes Plastic Collar itemID-11917 Each keg used two poppetsComes with a back nut, plastic collar, and a welded 3 16" nipple. Requires a 1" hole saw for installation. Due to the length of the back nut and collar, the total length of the shank will be about 4 3 8". Installation note: On a fridge there is generally no coolant lines running through the door but please check to see there are no lines connecting the door and the rest of the refrigerator. To test for coolant lines on a freezer start with a warm