Autonics photoelectric micro sensor Through-beam type BS4-Y2M-P Acting_02 ^ Double 415 V AC 50/60 Hz

415 V AC 50/60 Hz conforming to EN/IEC 60947-225 kA Icu at 440 V AC 50/60 Hz conforming to EN/IEC 60947-210 kA Icu at <= 125 V DC conforming to EN/IEC 60947-2 Utilisation category Category A conforming to EN 60947-2Category A conforming to IEC 60947-2 Suitability for isolation Yes conforming to EN 60898-1Yes conforming to EN 60947-2Yes conforming to IEC 60898-1Yes conforming to IEC 60947-2 Standards EN 60898-1IEC 60947-2EN 60947-2IEC 60898-1 Quality labels NF Complementary Network frequency 50/60 Hz Magnetic tripping limit 8 x In +/- 20 % [Ics] rated service breaking capacity 50 kA 100 % conforming to EN 60947-2 - 220

Tightening torque (N ・ m): 7 to 90

Single-Row Metric Design HR32013XJ

Two auto switches can be attached with a stroke of at least 5 mm

Except 300mm / 12”

Autonics photoelectric micro sensor Through-beam type BS4-Y2M-P Acting_02 ^ Double 415 V AC 50/60 HzSensing type Through beam type Sensing distance 5mm Sensing target Opaque Min. sensing target 0. 8 mm 1. 8 mm Hysteresis(distance) 0. 05mm Response time Light ON: Max. 20, Dark ON: Max. 80 Response frequency 2kHz Light source Infrared LED Peak emission wavelength 940nm Operation mode Light ON Dark ON(Built in) Indicator Operation indicator (red LED) Weight 2. 4 g Power voltage 5 24VDC 10%(ripple P P : max. 10%) Current consumption Max. 15mA Control